
Foundations
Overview Map
Welcome to the Overview Map, where everything your crew is running shows up in one place. Your projects, including live streams, sit right alongside airspace restrictions, temporary flight restrictions (TFRs), Notices to Airmen (NOTAMs), and real-time Automatic Dependent Surveillance-Broadcast (ADS-B) flight data, so you can size up a scene and jump into the right project without hunting for it. Spot a TFR going up over your area or a helicopter heading your way, and adjust your plan before it turns into a problem.
Open the overview map
Select the globe icon in the left bar to open the Overview Map. Map Options sits on the right side of the map.

Airspace
Turn on the Airspace switch to draw controlled and restricted airspace on the map. Turn it off when you want a clean map.

Restrictions
Restrictions shows controlled, restricted and prohibited airspace right on the map. Turn on the types that matter where you work so your crew sees them before launch.
Select Restrictions to choose which airspace types show on the map. The list is split into United States and Canada.

Tick the types you want, or use Select all and Deselect all to switch a whole country on or off at once.

Not sure what a type means? Select the ? icon at the top of the panel for a short definition of each one.

Select the United States or Canada tab to read that country’s types.

TFRs and NOTAMs
TFRs and NOTAMs both flag short-term changes to the airspace. In the US, temporary restrictions like a VIP visit or a wildfire are issued as TFRs, which are a type of NOTAM. In Canada, the same kind of restriction comes out as a NOTAM. Either can go up on short notice, so check them the day you fly.
Select TFRs to show temporary flight restrictions, such as air shows, hazards, security zones, and VIP movements. Use the arrow at the top left to go back to Map Options.

Select the ? icon to see what each TFR type covers.


Select NOTAMs to show notices that affect the airspace, such as obstacles, lighting outages, and runway closures.

The ? icon explains each NOTAM type here too.

Airspace data helps you build situational awareness. It doesn’t replace official sources, so always check them before you fly. Select Learn more at the bottom of any panel to read the full disclaimer.


Check what’s above a spot
Floor and ceiling are shown in feet above mean sea level (MSL) or above ground level (AGL). Surface (SFC) means the area starts at the ground. Occasionally (Ocsl) by NOTAM means the area is only active when a NOTAM turns it on.
Select anywhere on the map to list every airspace area at that spot, with its floor and ceiling. Select an area in the list to see its details, including the using and controlling agencies.


Track ADS-B traffic
ADS-B is a signal many aircraft broadcast with their position, altitude, speed and callsign. With it on your map, your crew can spot a medevac helicopter heading toward your scene before you hear it. Not every aircraft broadcasts ADS-B, so it doesn’t replace a visual observer. Keep eyes on the sky.
Turn on the ADS-B switch to start tracking aircraft near you. ADS-B is in Beta.

A circle appears on the map. Drag it to the area you want to watch.

Select Zoom To Area to fit the map to the circle.

Select Confirm to start tracking traffic inside the circle.

Aircraft inside the circle show up with their altitude and callsign, and move across the map as they fly.

Filter traffic
Drones fly low, so most of the traffic that matters to your crew is low too. A tight altitude range hides airliners passing far overhead and keeps your map focused on aircraft that could cross your path.
Select the eye next to an aircraft type to hide or show it.

Turn on Traffic Updates to keep aircraft positions updating live.

Set the Altitude Range to show only aircraft between two altitudes.

Use the unit menu next to Altitude Range to switch between Feet (ft) and Meters (m).

Select Update Shape to move the tracking circle.

Aircraft details
Select an aircraft on the map to see its callsign, position, altitude, speed, and heading.

Select More info to open the full details panel, with a photo of the aircraft type, its status, and telemetry.


Sharing location
Sharing Location shows teammates broadcasting their live location from the Atlas app, so you can see where your crew is on the map. Atlas is Nova’s partner app. Keep an eye out for updates on its upcoming release.

Projects
Every project in your workspace shows up on the map at its location, live streams included. It’s the fastest way to see what your crews are running and where.
Select Projects at the top of the map to list your projects. Use the date menu to choose how far back to look.

Type in Search for projects to find one by name.

Projects close together are grouped into a numbered circle. Select it to list the projects inside.


Zoom in and each project shows as a marker with its name. Select the marker to see its card.

Project pin in the wrong spot? Select the ⋮ icon on the card, then select Update location.

Move the project to where you want it on the map, then select Set Location.

Select Go to Project to open it.

Related lessons
Navigating the Layer Panel, Flights, and Area Mission Planning.
Related to Foundations










